SMG2000E Double Clamps Digital Phase Meter
Other name:Phase meter double clamp Phase meter double clamp Phase voltammeter
Specification Certificate of identification Service promise
Current limiting protection Power amplifier protection Voltage short circuit protection Open circuit protection Thermal protection of power amplifier
Note:Regarding product purchase, technical maintenance and other services, welcome to send email:
Digital double clamp Phase voltammeter is a high-precision low-price hand-held double-channel input measurement instrument designed for voltage current and Phase measurement on site.Using this meter the phase between u-u i-i and u-i can be easily measured in the field the phase sequence of sensitive and capacitive circuits and three-phase voltage can be distinguished the wiring group of transformers can be detected the secondary circuit and bus differential protection system can be tested the phase relationship between CT of each differential protection group can be read out and the wiring of the electricity meter can be checked.The tongs current transformer is used to input the measured current so there is no need to disconnect the measured line.When measuring the phase between u1-u2 the two input circuits are completely insulated and isolated so it completely avoids the possible short-circuit of the measured circuit caused by wrong wiring and thus burns out the measuring instrument.The display screen USES high-contrast Liquid crystal display with words up to 25mm and The screen Angle can be freely converted to about 70° to obtain better visual effects.
Digital double clamp Phase voltammeter enclosure USES engineering insulation materials another rubber vibration protection sleeve safe and reliable.
Product names:Phase meter double clamp Phase meter double clamp Phase voltammeter clamp forms a table clip-on Phase voltammeter Digital Phase double clamp Phase meter Digital double clamp table low-pressure volt-ampere Phase inspection table hand-held Digital double clamp Phase voltammeter double clamp type Digital Phase meter double clamp Digital Phase meter double clamp type volt-ampere Phase meter double clamp volt-ampere Phase table double clamp Phase meter Digital display double clamp Phase voltammeter
Environment temperature | (23±5)℃ |
Environmental humidity | (45~75)% RH |
Measured signal waveform | Sine wave、β=0.02 |
Measured signal frequency | (50±0.2)Hz |
The position of the measured current-
carrying conductor at the clamp mouth |
any |
The amplitude of The measured signal when
measuring The phase |
100~220V、0.5~1.5A |
External reference frequency electromagnetic
field interference |
Should be avoided |
Limit of quantity | Resolution | Basic error limit |
20V | 0.01V | ±(0.3% reading +0.2% range) |
200V | 0.1V | |
500V | 1V |
Limit of quantity | Resolution | Basic error limit |
200mA | 0.1mA | ±(0.3% reading +0.2% range) |
2A | 1mA | |
10A | 10mA |
Range | Resolution | Basic error limit |
0~360° | 1° | ±2° |
Environment temperature | (0~40)℃ | |
Environmental humidity | (20~80)% RH | |
Measured signal waveform | Sine wave、β=0.05 | |
Measured signal frequency | (50±0.5)Hz | |
The position of the measured current-
carrying conductor at the clamp mouth |
any | |
The amplitude of The measured signal when
measuring The phase |
U1-U2 phase: 30V ~ 500V | |
I1-I2 phase: 10mA ~ 10.00A | ||
U1-I2 phase or I1-U2 phase: 10V ~ 500V 10mA ~ 10.00A | ||
External reference frequency electromagnetic
field interference |
Should be avoided | |
Limit of rated operating error | Under the above rated working conditions the rated working error limit of each measured shall not exceed twice the corresponding basic error limit |
Display digit | Three and a half | |
Sampling rate | 3 times per second | |
The power supply | Single 9V laminated battery The power supply current is less than 5mA | |
Overall dimensions | Case size | 192×95×55mm3 |
Clamp shell size | 140×42×20mm3 | |
Jaw size | Φ7mm×9mm | |
Weight | Body | 280g |
Test forceps | 2×200g | |
Storage conditions | The temperature | -10℃~50℃ |
Quality Keep Improving - Service Pursuing Perfection Pre-sales service commitment Provide professional consulting service; dedicated salesman and professional technical engineer to answer customer questions Ensure customer get the detailed information about the product in hand Reasonable price. Quotation stamped and confirmed by Manager
Welcome customers visit on-purchase service commitment The contract and the technical agreement to sign by both parties Being trustworthy, follow the requirements and ensure successful implementation of signed contracts and technical agreements Focus on communication, actively communicate with users, take notes of user’s questions and schedule, provide the necessary technical support. Move quick and efficient, professional on delivery, installation, debugging, training and others
After-sales service commitment Professional after-sales service department; ask and listen to customer’s feedback about the products and take records. Product guaranty: one year free warranty, life long maintenance, since the delivery of the product Provide solutions within 24 hours when there is problems feedback from customer. Professional research and development team.
Mobile station
Copyright 2017 copyright all Wuhan electric motto Electric Co., Ltd. technical support: